1. Put on safety goggles and canvas gloves. The goggles protect your eyes from sparks and debris.
2. Turn on your grinding wheel. Hold the side of the drill bit next to the broad side of the wheel, so the bit is parallel to it.
3. Holding the bottom of the bit, press the side of the bit lightly against the side of the spinning wheel.
Cemented Carbide Inserts 4. Turn the bit clockwise while moving it downward on the wheel. Make sure the surface of the wheel is coming in contact with the cutting ridge of the blade.
After you have sharpened the ridges of the bit, touch any angles at the tip to the wheel to smooth them out and sharpen the edges. Take care to press only the flat side of each angle to the wheel, and not the point.
Tungsten Carbide Turning Inserts Manufacturer & Supplier: - https://www.estoolcarbide.com
Email: https://www.estoolcarbide.com
Tungsten Picture Center: https://www.estoolcarbide.com
Tungsten Video Center: https://www.estoolcarbide.com
Tungsten News & Tungsten Prices, 3G Version: https://www.estoolcarbide.com
The Carbide Inserts Blog: https://ccmg.bloggersdelight.dk